2
Configure the following parameters:
Table 8-37 NTP parameters
Field Description
Enable NTP Service Click to enable the NTP service.
Current date& time Enter the current local date and time.
Primary Time Server Select a time server from the list or select Custom settings and enter the address of the time
server.
Secondary Time Server Select a time server from the list or select Custom settings and enter the address of the time
server.
Third Time Server Select a time server from the list or select Custom settings and enter the address of the time
server.
Interval Time Enter the interval at which to get the time from the time server, in seconds.
Time Zone Select the local time zone from the list.
3
Click Save.
You can click
to update the displayed information.
END OF STEPS
8.44 Configuring USB
You can connect USB storage devices and USB printers to the USB ports of the device. The USB
menu enables you to configure FTP and SFTP for your USB storage devices.
Figure 8-42 NTP page
Configure a XS-2426X-A indoor ONT
Configuring the Application
Configuring USB
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
138 Issue 1
To Next Page
Loading...
