Nokia ONT XS-2426X-A - Diagnosing WAN Connections

2
Click Factory Default to reset the ONT to its factory default settings.
END OF STEPS
8.56 Diagnosing WAN connections
1
Click Maintenance→Diagnostics from the left pane. The Diagnostics page displays.
2
Select a WAN connection to diagnose from the list.
3
Enter the IP address or domain name.
4
Click to select the test type: ping, traceroute, or both.
5
Enter the number of ping attempts to perform (1 - 1000); the default is 4.
Figure 8-54 Diagnostics page
Configure a XS-2426X-A indoor ONT
Maintenance
Diagnosing WAN connections
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
150 Issue 1