EasyManua.ls Logo

Nokia ONT XS-2426X-A - Configuring QoS

Nokia ONT XS-2426X-A
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 8-23 US Classifier Rules parameters (continued)
Field Description
Interface Select an interface from the list; for example, None, LAN, 2.4G SSID, 5G SSID.
Source MAC Enter a source MAC address.
Destination MAC Enter a destination MAC address.
Source IP Enter a source IP address.
Destination IP Enter a destination IP address.
Source Port Enter a source port.
Destination Port Enter a destination port.
IP Protocol Type Enter a value between 0 and 254.
11
Click Save.
You can click Reset to reset the configured values.
12
To delete a classifier rule, click Delete for the applicable classifier rule in the classifier rules
table.
You can click to update the displayed information.
END OF STEPS
8.30 Configuring QoS
1
Click Network→QoS Config from the left pane. The QoS Config page displays.
Configure a XS-2426X-A indoor ONT
Network configuration
Configuring QoS
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
120 Issue 1

Table of Contents

Related product manuals