8.16 Viewing voice information
1
Click Status→Voice Information from the left pane. The Voice Information page displays the
following information:
Table 8-10 Voice Information parameters
Field Description
POTS 1 registration status Indicates if POTS 1 is registered or not.
The default is Registered
Blank if no voice service is provisioned
POTS2 registration status Indicates if POTS 2 is registered or not.
The default is Registered
Blank if no voice service is provisioned
POTS 1 line state Indicates the line in POTS 1. The default is Disabled.
POTS 2 line state Indicates the line in POTS 2. The default is Disabled.
Softswitch line1 Proxy IP address; blank if the line is not registered
Softswitch line 2 Proxy IP address; blank if the line is not registered
Telephone line1 phone number Phone number configured for a telephone line 1; +13290611266
Telephone line 2 phone number Phone number configured for a telephone line 2
Line 1 registration error code SIP standard error code for the register status; for example, 401, 403, 503
This field is blank if the register is set to OK
Figure 8-13 Voice Information page
Configure a XS-2426X-A indoor ONT
Viewing device information and connection status
Viewing voice information
Nokia ONT
Review Review
December 2021
Issue 1 97
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
To Next Page
Loading...
