2
Configure the following parameters:
Table 8-27 IP Filter parameters
Field Description
Enable IP Filter Click to enable an IP filter.
Mode Select an IP filter mode from the list:
• Drop for upstream
• Drop for downstream
Internal Client Select an internal client from the list:
• Custom settings: uses the IP address input below
• IP: uses the connecting devices' IP to the ONT
Local IP Address Enter the local IP address.
Source subnet mask Enter the source subnet mask.
Remote IP address Enter the remote IP address.
Destination subnet mask Enter the destination subnet mask.
Protocol Select an application protocol or ALL from the list.
3
Click Save.
You can click
to update the displayed information.
END OF STEPS
Figure 8-32 IP Filter page
Configure a XS-2426X-A indoor ONT
Security configuration
Configuring the IP filter
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
126 Issue 1
To Next Page
Loading...
