8.38 Configuring access control
This procedure describes how to configure the access control level (ACL).
Note: ACL takes precedence over the firewall policy.
The trusted network object will be shared for all WAN connections; it is not applied individually
to a WAN connection.
1
Click Security→Access Control from the left pane. The Access Control page displays.
2
Configure the following parameters:
Table 8-32 Access Control parameters
Field Description
WAN connection list Select a connection from the list.
Enable trusted network Click to enable or disable trusted network.
ICMP, Telnet, SSH, HTTP, TR-069, HTTPS,
SFTP
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
Figure 8-38 Access Control page
Configure a XS-2426X-A indoor ONT
Security configuration
Configuring access control
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
132 Issue 1
To Next Page
Loading...
