2
Configure the following parameters:
Table 8-35 Port Triggering parameters
Field Description
Application Name Select an application name from the list.
The default isCustom settings.
Open Port Enter the open port range.
Triggering Port Enter the triggering port range.
Expire Time Enter the expiration time in seconds.
Open Protocol Select the open port protocol from the list:
• TCP
• UDP
• TCP/UDP
Trigger Protocol Select the triggering port protocol from the list:
• TCP
• UDP
• TCP/UDP
Enable Triggering Select this checkbox to enable port triggering.
WAN Connection List Select a WAN connection from the list.
Note: Only active devices are shown on this list.
3
Click Add.
END OF STEPS
8.42 Configuring DDNS
1
Click Application→DDNS from the left pane. The DDNS page displays.
Configure a XS-2426X-A indoor ONT
Configuring the Application
Configuring DDNS
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
136 Issue 1
To Next Page
Loading...
