8.48 Configuring LOID
1
Click Maintenance → LOID Config from the left pane. The LOID Config page displays.
2
Configure the following parameters:
Table 8-40 LOID Configuration parameters
Field Description
LOID authetication
LOID Enter the LOID; the maximum number of characters is 24
If the password is null, this field may be left blank.
Password Enter the password; the maximum number of characters is 12.
3
Click Save.
END OF STEPS
Figure 8-46 LOID Config page
Configure a XS-2426X-A indoor ONT
Maintenance
Configuring LOID
Nokia ONT
Review Review
December 2021
Issue 1 143
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA