CCS Technical Documentation 5 - Disassembly Instructions
Company Confidential NMM-3
Issue 1 (11/2003) Copyright 2003 Nokia Corporation. Page 5-13
Company Confidential
8. Assemble the WCDMA antenna
into the B-Cover module ensuring the
antenna is engaged under the clip
nearest the battery bay wall before
the external clip is made by pushing
down on the antenna to clip it to the
B-Cover.
Note: Ensure the clips are engaged
by checking the clip is within the clip
aperture of the outside of the B-
Cover. Ensure also that the metalliza-
tion on the antenna is not scratched
or contaminated.
9. Assemble all electromechanical
devices into their specific apertures
provided for them in the B-Cover
module, including the vibra, micro-
phone and DC Jack. Ensure each
device is fully assembled into their
individual cavities and in the correct
orientation as illustration opposite
indicates.
Note: Ensure the contacts on each
device are avoided and the DC Jack
snapped home.
9 (ii). Removing the microphone.
8
9
(i)
9
(ii)
To Next Page
Loading...
