Nokia 7600 - Visual Quality Check During Re-Assembly

NMM-3 Company Confidential
5 - Disassembly Instructions CCS Technical Documentation
Page 5-20 Copyright  2003 Nokia Corporation. Issue 1 (11/2003)
Company Confidential
Visual Quality Checks during Re-assembly
• Ensure the window in the A-Cover module has no contamination, scratches or
wear in the viewing area of any kind
• Ensure the camera window viewing area is clear of contaminants or defects
• Ensure the corner piece is correctly fitted and free from contaminants or defects
• Ensure the side keys all depress
• Ensure all 7 screws are fitted and fully assembled
• Ensure the keymat and navi key are free from contaminants or defects
• Ensure the C and D-Covers as well as the painted surface on the A-Cover are free
from contaminants or defects
• Ensure all nine A-Cover clips are fully assembled
• Ensure the window border colour is the same colour as the A-Cover
• Ensure the window has protective tape fitted
• Ensure the camera window has protective tape fitted
• Ensure none of the A-Cover clips are broken
• Ensure all three UI module to B-Cover module clips are made
• Ensure there is no contamination or damage in the B-Cover battery bay area
• Ensure the LCD protective tape and D-Cover adhesive backing tapes have been
removed
• Ensure the phone is free from dust or hairs