NMM-3 Company Confidential
5 - Disassembly Instructions CCS Technical Documentation
Page 5-14 Copyright 2003 Nokia Corporation. Issue 1 (11/2003)
Company Confidential
9 (iii). Removing the Vibra Motor.
10. Ensure each of the three keys is
fully assembled into their apertures.
Ensure the bottom of the key is
aligned into the B-Cover with the
face being pushed through the aper-
ture in the B-Cover. The key flanges
must be tight up against the B-Cover
flange with no gap.
Note: Ensure the Class I faces of the
keys are not touched or damaged
during the assembly sequence.
Assembly of UI Module
1. Place the earpiece into the LCD
frame, ensuring the alignment fea-
ture on the device is aligned with the
slot in the frame. Press the device
into the frame.
Note: Ensure the metal body of the
earpiece is not distorted and the con-
tacts are not deformed. Ensure the
earpiece is fully assembled into the
LCD frame.
9
(iii)
10
1
To Next Page
Loading...
