Nokia 7600 - Page 19

CCS Technical Documentation 5 - Disassembly Instructions
Company Confidential NMM-3
Issue 1 (11/2003) Copyright  2003 Nokia Corporation. Page 5-19
Company Confidential
2. APAC ONLY - The tamper proof
label must be fitted across the split
line of the A-Cover and B-Cover in
the place indicated in the illustration
opposite.
3. Assemble the corner piece onto
the ATO module ensuring the top side
is placed in its retention recess within
the A-Cover first. Pushing the corner
piece downwards snaps the bottom
clip home.
Note: Be sure to only apply pressure
to the corner piece and that the com-
ponent is the correct way around.
4. Assemble the D-Cover module to
the ATO module by firstly removing
the protective tape from the adhesive
at the back of the D-Cover and then
clipping the D-Cover clips to the ATO
in order shown opposite.
Note: Apply light pressure across the
D-Cover once assembled to ensure
the adhesive takes. Ensure gloves are
used and the cosmetic Class I painted
surface of the D-Cover is not dam-
aged or contaminated in any way.
2
3
4