Nokia 7610 7610 - Fixed Dialling

Copyright © 2004 Nokia. All rights reserved.
Tools
77
PIN code request - When the PIN code request is active, the code is requested each time
the phone is switched on. Note that deactivating the PIN code request may not be
allowed by some SIM cards.
PIN code / PIN2 code / Lock code - Open this setting if you want to change the code.
Autolock period - You can set an autolock period, a time-out after which the phone is
automatically locked and can be used only if the correct lock code is entered. Key in a
number for the time-out in minutes or select None to turn off the autolock period.
• To unlock the phone, key in the lock code.
When the device is locked, calls still may be possible to the official emergency number
programmed into your device.
Lock if SIM changed - Select Yes if you want the phone to prompt for the lock code when
an unknown, new SIM card is inserted into your phone. The phone maintains a list of SIM
cards that are recognised as the owner’s cards.
Options in the
Fixed dialling view: Open,
Call, Activ. fixed dialling /
Deact. fixed dialling, New
contact, Edit, Delete, Add to
Contacts, Add from
Contacts, Find, Mark/
Unmark, Help, and Exit.
Fixed dialling - You can restrict your outgoing calls to selected phone numbers, if
supported by your SIM card. You need the PIN2 code for this function. When this function
is active, you can only call those phone numbers that are included in the fixed dialling
list or which begin with the same digit(s) as a phone number on the list.
• Press to set Fixed dialling on.
When fixed dialling is activated, calls still may be possible to the official emergency
number programmed into your device.
• To add new numbers to the Fixed dialling list, select Options → New contact or Add
from Contacts.
Closed user group (Network Service) - You can specify a group of people to whom you can
call and who can call you. For more information, contact your network operator or service
provider. Select: Default to activate the default group agreed on with the network
operator, On if you want to use another group (you need to know the group index
number), or Off.