Copyright © 2004 Nokia. All rights reserved.
Tools
82
• Very short names are not accepted. Use long names and avoid similar names for
different numbers.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
Adding a voice command to an application
1 In the Voice commands main view, scroll to the application that you want to add a
voice command to, and select Options → Add voice command.
To add a voice command to a profile, the Profiles folder must be opened and a specific
profile selected.
2 The text Press 'Start', then speak after tone is displayed.
• Press Start to record a voice command. The phone sounds a starting tone and the
note Speak now is displayed.
3 Pronounce the voice command. The phone will stop recording after approximately 5
seconds.
4 After recording, the phone plays the recorded command and the note Playing voice tag
is displayed. If you do not want to save the recording, press Quit.
5 When the voice command has been successfully saved, the note Voice tag saved is
displayed and a beep sounds. A symbol can be seen next to the application.
Adding an application to the list
Assign voice commands to other applications that are not listed in the Voice commands
main view.
1 In the Voice commands main view, select Options → New application.
2 Available applications are displayed. Scroll to the application that you want to add
and press Select.
3 Add a voice command to the new application. See “Adding a voice command to an
application” on page 82.
To Next Page
Loading...
