Settings
Copyright © 2007 Nokia. All rights reserved. 56
Synchronise from a server
To use a remote internet server, you must
subscribe to a synchronization service.
For more information and the settings
required for this service, contact your
service provider. You may receive the
settings as a configuration message. See
“Configuration settings service”, p. 10
and “Configuration”, p. 58.
If you have saved data on the remote
internet server, to synchronise your
phone, start the synchronization from
your phone.
Select Menu > Settings > Connectivity >
Data transfer > Server synchronisation.
Depending on the settings, there may
display Initialising synchronisation or
Initialising copy.
Synchronizing for the first time or after
an interrupted synchronization may take
up to 30 minutes to complete, if the
contacts or calendar are full.
USB data cable
You can use the CA-101 USB data cable
to transfer data between the phone and a
compatible PC with Nokia PC Suite. To
activate the phone for data transfer,
connect the data cable to the phone and
PC. See “Charge the battery with the CA-
101 data cable”, p. 14 for more
information on connecting the data
cable. The phone detects the data cable
automatically.
■ Call
Select Menu > Settings > Call and from
the following options:
Call divert—to divert your incoming calls
(network service). You may not be able to
divert your calls if some call barring
functions are active. See Call barring
service in “Security”, p. 58.
Anykey answer > On—to answer an
incoming call by briefly pressing any key,
except the power key, the left and right
selection keys, or the end key.
Automatic redial > On—to make a
maximum of 10 attempts to connect the
call after an unsuccessful call attempt
Speed dialling > On—to dial the names
and phone numbers assigned to the
speed-dialling keys, 2 to 9, by pressing
and holding the corresponding
number key.
Call waiting > Activate—to have the
network notify you of an incoming
call while you have a call in progress
(network service). See “Call waiting”,
p. 22.
Summary after call > On—to briefly
display the approximate duration and
cost (network service) of the call after
each call
Send my caller ID > Yes—to show your
phone number to the person you are
calling (network service). To use the
setting agreed upon with your service
provider, select Set by network.
To Next Page
Loading...
