Nokia 8600 LUNA - Restore Factory Settings

Settings
59 Copyright © 2007 Nokia. All rights reserved.
PIN2 code request—to select whether the
PIN2 code is required when using
a specific phone feature which is
protected by the PIN2 code. Some SIM
cards do not allow the code request to be
turned off.
Call barring service—to restrict incoming
calls to and outgoing calls from your
phone (network service). A barring
password is required.
Fixed dialling—to restrict your outgoing
calls to selected phone numbers if this
function is supported by your SIM card
Closed user group—to specify a group of
people whom you can call and who can
call you (network service)
Security level > Phone—to set the phone
to ask for the security code whenever a
new SIM card is inserted into the phone.
If you select Memory, the phone asks for
the security code when the SIM card
memory is selected, and you want to
change the memory in use.
Access codes—to change the security
code, PIN code, UPIN code, PIN2 code, or
barring password
Code in use—to select whether the PIN
code or UPIN code should be active
Authority certificates or User
certificates—to view the list of the
authority or user certificates downloaded
into your phone. See “Certificates”, p. 77.
Security module settings—to view
Security module details, activate Module
PIN request, or change the module PIN
and signing PIN. See also “Access codes”,
p. 9.
■ Restore factory
settings
To reset some of the menu settings to
their original values, select Menu >
Settings > Restore factory sett.. Enter the
security code.