Nokia 9210 - Page 24

PAGE 24 (50) Version 1.0 Approved
Nokia Mobile Phones Customer Care E&A
Technical Services Repair Concepts
Confidential
19.07.2001
10.
It is important that the Coax Cable is
guided like in the photo. Otherwise it
can be damaged easily when
assembling the module.
11.
When assembling the unit you start
with putting the UI/Module into the
Screenframe. Remember also to check
or to use a new Display Adhesive.
12.
Put the Connector Flex into its
guidance. Please be careful not to
destroy the flex.
13.
Place the Flex Cover over the
Connector Flex into the same
guidance.
Service Manual 9210 Level 2 Copyright 2001 © Nokia Mobile Phones