Nokia 9210 - Page 25

PAGE 25 (50) Version 1.0 Approved
Nokia Mobile Phones Customer Care E&A
Technical Services Repair Concepts
Confidential
19.07.2001
14.
Plug-in the System Connector
through slightly pressing it down with
one finger.
15. Plug-in the Coax Connector.
16.
Set up your torquedriver with
16 Ncm
as seen in the picture. Please
do not underestimate the use of the
right torque. It avoids damaging the
threads and ensures that all the
screws are tightened constantly.
17.
Now you can tighten the two display
screws with
16 Ncm
.
Service Manual 9210 Level 2 Copyright 2001 © Nokia Mobile Phones