Get started
11
■ Switch on or off
To switch on, press and hold the multifunction key for about
2 seconds. The headset beeps, and the green indicator light
is displayed. The headset tries to connect to the last used
phone and music device, if any.
To switch off, press and hold the multifunction key for
about 4 seconds. The headset beeps, and the red indicator
light is briefly displayed.
■ Pair the headset
If your phone supports the A2DP Bluetooth profile and has a
music player feature, you can use the phone to make and
receive calls, and to play music with the headset.
1. Ensure that your phone or music device is on and the
headset is off.
2. Press and hold the multifunction key (for about 4
seconds) until the green indicator light starts to flash
quickly.
To Next Page
Loading...
