In remote SIM mode you can use your device's SIM card with compatible accessories.
To make or receive calls when in remote SIM mode, you need to have a compatible
accessory, such as a car kit, connected to your device.
Your device will only allow emergency calls in this mode.
1 Select Options > New paired device. The device starts to search for Bluetooth
devices within range. If you have sent data using Bluetooth connectivity before,
a list of the previous search results is displayed. To search for more Bluetooth
devices, select More devices.
2 Select the device with which you want to pair, and enter the passcode. The same
passcode must be entered in the other device as well.
3 To make the connection between your device and the other device automatic,
select Yes. To confirm the connection manually every time a connection attempt
is made, select No. After pairing, the device is saved to the paired devices page.
To give a nickname to the paired device, select Options > Assign short name. The
nickname is displayed in your device.
To delete a pairing, select the device whose pairing you want to delete and Options >
Delete. To delete all pairings, select Options > Delete all. If you are currently
connected to a device and cancel the pairing with that device, pairing is removed
immediately, and the connection is ended.
To allow a paired device to connect automatically to your device, select Options >
Set as authorised. Connections between your device and the other device can be
made without your knowledge. No separate acceptance or authorisation is needed.
Use this status only for your own devices, such as your compatible headset or
computer, or devices that belong to someone you trust. If you want to accept
connection requests from the other device separately every time, select Options >
Set as unauthorised.
To use a Bluetooth audio accessory, such as a Bluetooth handsfree or headset, you
need to pair your device with the accessory. For the passcode and further
instructions, see the accessory user guide. To connect to the audio accessory, switch
on the accessory. Some audio accessories connect automatically to your device.
Otherwise, open the paired devices tab, and select the accessory and Options >
Connect to audio device.
Block devices
Select
> Settings > Connectivity > Bluetooth.
Connectivity 47
To Next Page
Loading...
