To change the lock code, select Phone and SIM card > Lock code. The default lock
code is 12345. Enter the current code and then the new code twice. The new code
must be 5-255 characters long. Alphanumeric (uppercase and lowercase) characters
can be used. The device notifies you if the lock code is not properly formatted.
Common accessory settings
Select
> Settings and Settings > General > Enhancement.
With most accessories, you can do the following:
To define which profile is activated when you attach an accessory to your device,
select the accessory and Default profile.
To set the device to answer phone calls automatically after 5 seconds when an
accessory is attached, select Automatic answer > On. If the ringing type is set to
Beep once or Silent in the selected profile, automatic answering is disabled.
To illuminate the device while it is attached to an accessory, select Lights > On.
The available options may vary depending on the accessory.
Restore original settings
To restore the original device settings, select
> Settings and Settings >
General > Factory settings. To do this, you need your device lock code. After
resetting, the device may take a longer time to switch on. Documents, contact
information, calendar entries, and files are unaffected.
Data management
Install applications
Select
> Applications > App. mgr. > Installations.
You can transfer installation files to your device from a compatible computer,
download them during browsing, or receive them in a multimedia message, as an e-
mail attachment, or using other connectivity methods, such as Bluetooth
connectivity. You can use Nokia Application Installer in Nokia Ovi Suite to install an
application to your device.
Icons in Application manager indicate the following:
SIS or SISX application
94 Data management
To Next Page
Loading...
