Sequence mode is available only in the
main camera. To use sequence mode, you
need to have enough memory available.
Set the camera to capture images in a
sequence
1 Select
> Sequence. To close the
settings view, select
.
2 Press and hold the capture key. The
device captures images until you
select Stop, or until 18 images have
been captured.
Deactivate sequence mode
Select
> Single shot.
The captured images are displayed in a
grid. To view an image, select the image.
To return to the sequence mode
viewfinder, press the capture key.
You can also use sequence mode with the
self-timer.
Self-timer
Use the self-timer to delay the capture, so
that you can include yourself in the image.
Set the self-timer delay
Select
> and the delay desired
before the image is captured.
Activate the self-timer
Select Activate. The stopwatch icon on
the screen blinks and the remaining time
is displayed when the timer is running.
The camera captures the image after the
selected delay elapses.
Deactivate the self-timer
Select
> > .
Tip: To keep your hand steady when
capturing an image, try using a delay of 2
seconds.
Video recording
Record a video clip
1 To switch from image mode to video
mode, if necessary, select
> .
2 To start recording, press the capture
key, or select
. A red record icon is
displayed.
3 To pause recording, select Pause. To
resume, select Continue. If you pause
recording and do not press any key
within one minute, the recording
stops.
To zoom in or out, use the zoom keys.
4 To stop recording, press the capture
key. The video clip is automatically
saved in Photos.
Video recording on-screen controls
and indicators
The video viewfinder displays the
following:
1 Capture mode indicator
2 Audio muted
3 Capture icon. Select to record video
clips.
4 Video light indicator
Camera 81
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
