Using the remote control button
13
Copyright
© 2004 Nokia. All rights reserved.
If the car ignition is turned on and there are several paired phones in the vicinity,
the car kit tries to find the "default phone" within a few seconds.
If the car kit cannot connect to the "default phone" (e.g. because it is switched off
or its user rejects the connection), the car kit tries to connect to the "last used
phone" within a few seconds.
Thereafter, you can connect to the car kit in the phone’s Bluetooth menu.
To use the car kit with a paired phone that is not a "default phone" or "last used
phone", make the connection in the phone’s Bluetooth menu.
■ Resetting the car kit
You can reset the car kit to the original settings, for example, to change the
default user of the car kit.
When you reset the car kit, all of its settings, including pairing information, are
cleared.
To reset the car kit: Make sure the car kit is turned off. Press and hold the remote
control button for about 10 seconds until the indicator light starts to flash. Once
the car kit has been reset, the car kit beeps twice.
To Next Page
Loading...
Need help?
General
