Music player
22
If your music player supports the AVRCP
Bluetooth profile, you can also do the
following:
• To select the previous song, press
.
• To select the next song, press .
To return to the previous screen without
stopping playback, press .
To exit to the standby mode without stopping playback, press and hold
for about 2 seconds.
If you receive or make a call while listening to music, the music is
paused until you end the call.
■ Adjust music volume
To adjust the volume during music playback, turn the wheel left to
decrease the volume or right to increase it, or set the volume on your car
radio. To set the default volume for music, see “Audio settings”, p. 25.
To mute the volume, press during music playback. To restore the
original volume, press .
■ Music player settings
To adjust the music player settings, open the music player menu, and
press the wheel when Music settings is displayed.
To view or change the music player connected to the car kit, select
Active music player. To change the music player, select the desired
player from the list. See also “Bluetooth settings”, p. 25.
To modify the tone of the music playback, select Equaliser and the
desired option. This setting cannot be changed if you use the car radio
amplifier for music.
To exit from the music settings, select Back.
To Next Page
Loading...
