Nokia CLASSIC 3110 - E-mail Application; Write and Send an E-mail

E-mail application
The e-mail application uses a packet data connection
(network service) to allow you to access your e-mail
account. This e-mail application is different from the
SMS e-mail function. To use the e-mail function on your
device, you need a compatible e-mail system.
You can write, send, and read e-mail with your device.
Your device supports POP3 and IMAP4 e-mail servers.
This application does not support keypad tones.
Before you can send and retrieve any e-mail messages,
you must obtain a new e-mail account or use your
current account. To check the availability of your e-mail
account, contact your e-mail service provider.
Check your e-mail settings with your e-mail service
provider. You may receive the e-mail configuration
settings as a configuration message. See "Configuration
setting service," p. 12.
To activate the e-mail settings, select Menu >
Messaging > Message settings > E-mail
messages.
See "E-mail messages," p. 35.
Setting wizard
The setting wizard starts automatically if no e-mail
settings are defined in the phone.
To enter the settings manually, select Menu >
Messaging > E-mail > Options > Manage
accounts > Options > New. The options for Manage
accounts allow you to add, delete, and change the e-
mail settings. Make sure that you have defined the
correct preferred access point for the operator. See
"Configuration," p. 47.
The e-mail application requires an internet access point
without a proxy. WAP access points normally include a
proxy and do not work with the e-mail application.
Write and send an e-mail
You can write your e-mail message before connecting
to the e-mail service; or connect to the service first, then
write and send your e-mail.
1. Select Menu > E-mail > Write new e-mail.
2. If more than one e-mail account is defined, select
the account from which you want to send the e-
mail.
3. Enter the recipient’s e-mail address, write the
subject, and enter the e-mail message. To attach a
file from Gallery, select Options > Attach file.
4. To send the e-mail message, select Send > Send
now.
To save the e-mail in the Outbox folder to be sent
later, select Send > Send later.
To edit or continue writing your e-mail later, select
Options > Save as draft. The e-mail is saved in
Outboxes > Drafts.
To send the e-mail later, select Menu >
Messaging > E-mail > Options > Send now or
Send/check e-mail.
29
Messaging