If the data transfer is not started within 2 minutes after
the activation of the IR port, the connection is cancelled
and must be started again.
IR connection indicator
• When is shown continuously, the IR connection
is activated, and your phone is ready to send or
receive data through its IR port.
• When blinks, your phone is trying to connect to
the other device, or a connection has been lost.
Bluetooth
Bluetooth wireless technology
Bluetooth technology allows you to connect the device
to a compatible Bluetooth device within 10 meters (32
feet). Since devices using Bluetooth technology
communicate using radio waves, your device and the
other devices do not need to be in direct line-of-sight,
although the connection can be subject to interference
from obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification
2.0 + EDR supporting the following profiles: generic
access, network access, generic object exchange,
advanced audio distribution, audio video remote
control, hands-free, headset, object push, file transfer,
dial-up networking, SIM access, and serial port. To
ensure interoperability between other devices
supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the
manufacturers of other devices to determine their
compatibility with this device.
There may be restrictions on using Bluetooth
technology in some locations. Check with your local
authorities or service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity >
Bluetooth and from the following options:
• Bluetooth — Select On to activate the Bluetooth
function. indicates that Bluetooth is activated.
• My phone's visibility — to define how your device
is shown to other Bluetooth devices
• Search for audio enhancements — to search for
compatible Bluetooth audio devices. Select the
device that you want to connect to the phone.
• Active devices — to check which Bluetooth
connection is currently active
• Paired devices — to search for any Bluetooth device
in range. Select New to list any Bluetooth device in
range. Select a device and Pair. Enter an agreed
Bluetooth passcode of the device (up to 16
characters) to pair the device to your device. You
must only give this passcode when you connect to
the device for the first time. Your device connects to
the other device, and you can start data transfer.
• My phone's name — to set the device name for
Bluetooth connections
43
Settings
To Next Page
Loading...
