Call
Select Menu > Settings > Call and from the following
options:
• Call divert — to divert your incoming calls (network
service). You may not be able to divert your calls if
some call barring functions are active.
See
"Security," p. 48.
• Voice clarity — Select Active to enhance speech
intelligibility especially in noisy environments.
• Anykey answer — Select On to answer an incoming
call by briefly pressing any key, except the power key,
the left and right selection keys, or the end key.
• Automatic redial — Select On to make a maximum
of 10 attempts to connect the call after an
unsuccessful call attempt.
• Speed dialling — Select On to dial the names and
phone numbers assigned to the number keys 2 to 9
by pressing and holding the corresponding number
key.
• Call waiting — Select Activate to have the network
notify you of an incoming call while you have a call
in progress (network service).
See "Answer or reject
a call," p. 22.
• Summary after call — Select On to briefly display
the approximate duration after each call.
• Send my caller ID — Select Yes to show your phone
number to the person you are calling (network
service). To use the setting agreed upon with your
service provider, select Set by network.
• Line for outgoing calls — to select the phone line
1 or 2 for making calls if supported by your SIM card
(network service)
Phone
Select Menu > Settings > Phone and from the
following options:
• Language settings — To set the display language
of your device, select Phone language.
Automatic selects the language according to the
information on the SIM card. To select the USIM card
language, select SIM language. To set a language
for the voice playback, select Voice recognition
language.
See "Enhanced voice dialing," p. 22.
• Security keyguard — To set the device to ask for
the security code when you unlock the keyguard.
Enter the security code, and select On.
• Automatic keyguard — to lock the keypad
automatically after a preset time delay when the
device is in the standby mode and no function of the
device has been used. Select On, and set the time.
• Welcome note — to write the note that is shown
when the device is switched on
• Flight query — The device asks every time when it
is switched on whether you want to use the flight
profile. With the flight profile, all radio connections
are switched off. The flight profile should be used in
areas sensitive to radio emissions.
• Phone updates — to receive software updates from
your service provider (network service). This option
may not be available, depending on your device.
See
"Software updates over the air," p. 48.
• Operator selection — Select Automatic to set the
device to automatically select one of the cellular
networks available in your area. With Manual you
can select a network that has a roaming agreement
with your service provider.
46
Settings
To Next Page
Loading...
