5. Make calls
When the device is locked, calls still may be possible to the official emergency number programmed into your device.
In the offline profile, you may need to enter the lock code and change the device to a calling profile before making any call,
including a call to an emergency number.
To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be
located in a service area of the cellular network. The GPRS connection is put on hold during voice calls unless the network
supports dual transfer mode or you have a USIM card and are within the coverage of a UMTS network.
Enter the phone number, including the area code, and press the call key. If you enter an incorrect character, press the backspace
key.
Tip: For international calls, enter the + character that replaces the international access code, and enter the country
code, area code (omit the leading 0, if necessary), and phone number.
To end the call or cancel the call attempt, press the end key.
To make a call using the saved contacts, press Contacts in standby mode. Enter the first letters of the name, scroll to the name,
and press the call key. See "Contacts," p. 39.
Press the call key to view up to 20 numbers that you last called or attempted to call. Scroll to the desired number or name, and
press the call key to dial the number. See "Log," p. 35.
Use the volume keys to adjust the volume of an active call.
When you open the cover of the device during a call, the loudspeaker is activated.
To call your voice mailbox (network service) in standby mode, press and hold 1, or press 1 then the call key.
Speed dial
Speed dialing allows you to make a call by pressing and holding a number key.
Before using speed dialing, select Menu > Tools > Settings > Call > Speed dialling > On.
To assign a number key to a phone number, select Menu > Tools > Speed dial. Scroll to the number key (2 - 9) on the screen,
and select Options > Assign. Select the desired number from the Contacts directory.
To remove the phone number assigned to a number key, scroll to the speed dialing key, and select Options > Remove.
To change a phone number assigned to a number key, scroll to the speed dialing key, and select Options > Change.
Answer a call
Note: The actual invoice for calls and services from your service provider may vary, depending on network features,
rounding off for billing, taxes, and so forth.
To answer a call, press the call key.
To reject the call, press the end key.
To mute a ringing tone instead of answering a call, select Silence.
To answer a new call during a call when the Call waiting function is activated, press the call key. The first call is put on hold. To
end the active call, press the end key.
Options during a call
Select Options for the following options during a call:
• Mute — Listen to the active conversation, but your voice cannot be heard by the other parties of the call.
• Unmute — Your voice can be heard again by the other parties of the call.
• Drop — Drop a party from the active call.
• End active call — End the currently active call.
• Menu — View the applications menu of your device.
• Hold — Place the active call on hold.
• Unhold — Remove the active call from hold.
• New call — Place a new call while on a call, if conference calling (network service) is available.
• Answer — Answer an incoming call while on a call, if Call waiting is activated.
• Reject — Reject an incoming call while on a call, if Call waiting is activated.
• Lock keypad — Lock the device keypad while on a call.
• Conference — Merge an active and a held call into a conference call (network service).
• Private — Converse privately with a selected participant during a conference call (network service).
Copyright © 2006 Nokia. All Rights Reserved. 33
To Next Page
Loading...
Need help?
General
Weight and Dimensions
