Nokia E7-00 - Page 27

Nokia E7-
00
RM-626
Service Manual Level 1&2
27 Confidential | Copyright © 2010 Nokia | All rights reserved Version 1.0
13) Open up the EARPIECE package. Remove the
EARPIECE protective film.
14) Use the shown guiding markings on the
WINDOW to place the EARPIECE with the tweezers
and push it down with the SS-93 to activate the
adhesive.
15) Remove the WINDOW flex adhesive protective
film.
16) Connect the WINDOW connector by gently
pressing it with the SS-93. Be careful not to damage
the connector or any nearby components.
17) Attach the WINDOW flex adhesive by gently
pressing with the SS-93. Be careful not to damage
the connector or any nearby components.
18) Remove the SPACER FLEX LID adhesive protective
film.