Nokia E7-00 - Page 28

Nokia E7-
00
RM-626
Service Manual Level 1&2
28 Confidential | Copyright © 2010 Nokia | All rights reserved Version 1.0
19) Place the SPACER FLEX LID by using the two
shown guiding pins. Activate the SPACER FLEX LID
adhesive by carefully pressing it with the SS-93.
20) Connect the DISPLAY connector with the SS-93.
Be careful not to damage any nearby components.
21) Turn around the DISPLAY. Be careful not to
damage the DISPLAY flex while turning the DISPLAY.
22) Press the DISPLAY flex to bend it as shown.
23) Remove the DISPLAY protective film.
24) Remove the protective film from the inner side of
the WINDOW.