Nokia E7-00 - Page 29

Nokia E7-
00
RM-626
Service Manual Level 1&2
29 Confidential | Copyright © 2010 Nokia | All rights reserved Version 1.0
25) Turn the WINDOW over. While turning the
WINDOW, make sure that the WINDOW connector
stays connected and the WINDOW flex remains
undamaged.
26) Press from side of the device as shown, to lock
the shown clip holding the WINDOW in the LID
CHASSIS ASSEMBLY.
27) Press also from the other side of the device as
shown, to lock the shown clip holding the WINDOW
in the LID CHASSIS ASSEMBLY.
28) Place the LID FRAME onto the WINDOW and press
from all sides of the LID FRAME to attach it to the LID
CHASSIS ASSEMBLY.
29) Slide open the device. Tighten these two TORX +
size 4 screws to the torque of 5 Ncm in the order
shown.
30) Tighten these two TORX + size 4 screws to the
torque of 12 Ncm in the order shown.