Nokia E7-00 - Page 33

Nokia E7-
00
RM-626
Service Manual Level 1&2
33 Confidential | Copyright © 2010 Nokia | All rights reserved Version 1.0
49) Place the CONNECTOR LOCK PLATE to its place.
Press the CONNECTOR LOCK PLATE with the SS-93 to
attach the two clips holding it.
50) Close the device and insert the BATTERY to its
place.
51) Remove the camera window protective film from
the inner side of the BACK COVER.
52) Insert the shown side of the BACK COVER into
BASE CHASSIS ASSEMBLY.
53) Then press from the opposite side to lock the
BACK COVER to the BASE CHASSIS ASSEMBLY.
54) Tighten the four TORX + size 4 screws to the
torque of 14 Ncm in the order shown.