Nokia E75 RM-412/RM-413
Service Manual Level 1&2
 
13 Confidential
Copyright © 2009 NOKIA 
All rights reserved
Version 1.0
ISSUE 1
 
7) Release the EARPIECE HOLDER with the SS-93 and 
remove it with the tweezers. 
8) Separate the EARPIECE from the EARPIECE HOLDER 
with the tweezers. 
9) Open the LCD connector from the 2 MX UI FLEX 
ASSEMBLY with the SS-93. Be careful not to damage 
the connector. 
10) Release the LCD with the SRT-6. 
11) Carefully lift up the LCD and push it into direction 
shown. 
12) Slide the phone open and release the five clips 
holding the QWERTY KEYMAT using the SRT-6. Release 
the clip near the space bar first.