29
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
E90 RA-6
Page (51) ISSUE 1
Service Manual Level 1&2
19. Take these 4 screws…
20. …and place them into their recesses.
21. Set the correct torque.
22. Apply the torque to these screws in the order shown.
23. Replace the QWERTY COVER, beginning on the left side,
where the connectors are located.
24. Close the clips, check that no cables will be squeezed,
otherwise the DUAL AXIS HINGE MODULE becomes unusable.
Download free service manual at http://ponsel1.blogspot.com
To Next Page
Loading...
