Nokia fold 6600 - USB Data Cable; Call

39
Settings
39
USB data cable
You can use a USB data cable to transfer data between
your phone and a compatible PC or a printer supporting
PictBridge.
To activate the phone for data transfer or image
printing, connect the data cable and select the mode:
Ask on conn. — to set your phone to ask whether to get
connected
PC Suite — to use the data cable for Nokia PC Suite
Printing & Media — to use your phone with a PictBridge
compatible printer, or to connect your phone to a
compatible PC
Data storage — to connect to a PC that does not have
Nokia software and use your phone for data storage
To change the USB mode, select Menu > Settings >
Connectivity > USB data cable and the desired USB
mode.
■ Call
Select Menu > Settings > Call and from the following
options:
Call divert — to divert your incoming calls (network
service). You may not be able to divert your calls if some
call barring functions are active. See Call barring service
in “Access codes,” p. 11.
Anykey answer — to answer an incoming call by briefly
pressing any key, except the power key, the left and
right selection keys, or the end key
Automatic redial — to automatically redial the number
if a call fails. The phone tries to call the number 10
times.
Video-voice redial — to select whether the phone
automatically makes a voice call to the number to
which a video call failed
Voice clarity — to enhance speech intelligibility
especially in noisy environments
Speed dialling — See “Speed dialling,” p. 23.
Call waiting — See “Call waiting,” p. 24.
Summary after call — to briefly display the approximate
duration and cost (network service) of the call after
each call
Send my caller ID — to show your phone number to the
person you are calling (network service). To use the
setting agreed upon with your service provider, select
Set by network.
© 2008 Nokia. All rights reserved.