Nokia G-240WZ-A - MAC Filtering

12 Nokia Smart Home user guide
4. From the IP Filtering detail screen , select
the Mode option, which will allow you to pick
the ltering type:
Drop for upstream: Residential gateway will
drop all trac originating from the specied
device.
Drop for downstream: Residential gateway
will drop all trac with a destination to the
specied device.
5. Select the Device option, which will allow
you to either select a known device from
the ONU memory or manually register a
new device.
6. Select the Protocol option to allow you to
select specic types of trac for ltering
or to lter all trac.
MAC ltering
Equipment in your network is identied by the
unique MAC address assigned to that device.
You can restrict which devices have access to
the internet according to their MAC address
by allowing or blocking access for the devices
listed (your choice).
1. From the Home/Dashboard screen, select
the icon [Figure 2], then select the
Advanced Settings option.
2. Select the Mac Filter option, and you will
be directed to the Mac Filtering screen.
From this screen, you can Enable or Disable
the MAC lter option in the ONT. You can
Block or Allow lists of MAC addresses.
3. Select the + option to add a specic
Mac address.
Figure 15
Figure 16