42 Nokia Smart Home user guide
29. Once an automation is turned on, it can
be turned o by selecting the automation
name again. You will now see a gray indicator
showing that the automation is turned o.
Setting up a security
video camera
1. Factory reset the camera based on
manufacturer’s instructions.
2. Enable the WPS and put in PBC mode using
the regular RG WebGUI for 2.4GHz or 5GHz
based on the camera.
3. From the Home/Dashboard screen, select
the Devices option.
4. Next, you will be directed to the Devices
screen.
Figure 77
Figure 78
To Next Page
Loading...