Nokia G-240WZ-A - Set Up Wireless Network

5 Nokia Smart Home user guide
How to setup your
wireless network
To connect the Wi-Fi enabled devices in your
home network to the ONT and the internet, you
must enable and congure a wireless network
on the ONT. Depending on the type of the ONT,
the Wi-Fi options for wireless 5GHz may be
available.
Wireless 2.4GHz
This frequency range is used by the
802.11b/g/n standard and can provide widely
available bandwidths of up to 450 Mb/s.
This conguration can be done as follows:
1. Open the SmartHome app.
2. Enter your user name and password in the
login window, (see Appendix 3 for mobile
app user credentials details).
3. For login options, click the Advanced
Settings option. A eld to input the ONT’s
IP address will pop up. The default value
is 192.168.1.254. You can edit this eld if
necessary.
4. Click Login.
5. You will be directed to the Home/Dashboard
screen [Figure 2] where the devices
connected to the Wi-Fi network will be
displayed.
6. Click on the icon, and you will be
directed to the Network screen.
7. From the Network screen, enable Wi-Fi
access by selecting the Enable Wi-Fi option.
Figure 2
Figure 1