Nokia Go Earbuds2 Pro TWS-222 - Getting Started; Initial Charging and Preparation; Ear Tip Fitment

1. Get started
1.1 Before using Nokia Go Earbuds
2
Pro, take off the lm on the earbuds and place
the earbuds back in the charging case. Then connect the USB Type-C cable to a
power source to begin charging. Fully charge the earbuds and the charging case
before the rst use.
1.2 For optimal t and audio performance,
replace the ear tips with the size that
best suits you.
= ≤10%=
=
= ≥10%
=
=
2