Nokia Go Earbuds+ User Manual

Nokia TWS-201
2. Pair and connect with Bluetooth
2.1 Pairing with the device
2.1a Turning on and pairing:
When you take the earbuds out from the charging case, the earbuds will turn on
and pair with each other automatically. When they have successfully paired, the
earbuds are ready to connect with your Bluetooth
®
device.
2.1b Connecting with your Bluetooth
device:
Turn on Bluetooth in your device
and choose “Nokia TWS-201” from
the Bluetooth menu to connect.
During the connection process, the
LED indicator light on the right
alternately.
The LED indicator lights of the
seconds when they are successfully
connected via Bluetooth
2.2 After the initial pairing, the earbuds will automatically connect with your
Bluetooth device whenever taken out of the charging case.
2.3 The earbuds will automatically power off if there is no Bluetooth connecion
within 5 minutes.
1 / 10 secs
3

Nokia Go Earbuds+ Specifications

General

Driver size	10 mm
Bluetooth version	5.0
Water resistance	IPX4
Type	In-ear
Frequency response	20 Hz - 20 kHz
Charging time	2 hours
Weight (each earbud)	4.3 g
Impedance	32 ohms