Nokia Go Earbuds+ User Manual

1. Get started
1.1
earbuds back in the charging case. Then connect the USB Type-C cable to a
power source to begin charging. Fully charge the earbuds and the charging case
replace the ear tips with the size that
best suits you.
2

Nokia Go Earbuds+ Specifications

General

Driver size	10 mm
Bluetooth version	5.0
Water resistance	IPX4
Type	In-ear
Frequency response	20 Hz - 20 kHz
Charging time	2 hours
Weight (each earbud)	4.3 g
Impedance	32 ohms