Contacts
24
To set up speed dialling, press the wheel in the standby mode, and select
Contacts > Speed dials.
• To allow or prevent speed dialling, select Activate or Deactivate. If
you deactivate speed dialling, you are prompted to activate it when
you try to use speed dialling.
• To view the contacts assigned to speed dialling numbers, select View,
and scroll through the list. To call the selected contact, press the
wheel.
• To assign a name or phone number to a speed dialling number, select
Assign. To select the name from the contacts list, select the first
letter of the name. The names starting with this letter are shown.
Select the desired name, phone number, and speed dialling number.
• To delete an assigned speed dial, select Delete and the contact that
you want to remove from the speed dial list. The contact is removed
only from the speed dial list, not from Contacts.
■ Copy contacts to car kit
You can copy the contacts saved in the internal memory of two
compatible mobile phones that you connect to the car kit.
To copy the contacts from the connected device, press the wheel in the
standby mode, and select Contacts > Download Contacts > Yes. is
displayed during the copying.
If you make or receive a call while the contacts are copied, the copying
may be stopped. In this case, start the copying again. While the contacts
are being copied, you cannot use the contacts saved in Contacts.
If you connect another device to the car kit, the contacts copied from
the previous device cannot be used. To use the contacts saved in the
new device with the car kit, copy the contacts to the car kit.
Each time you connect your device to the car kit, the contacts saved in
Contacts are updated if the contacts saved in the device have changed.
To Next Page
Loading...
