EasyManua.ls Logo

Nokia IP130 - Security Appliance - Internet Calls; Create an Internet Call Profile

Nokia IP130 - Security Appliance
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
invitation. You can also press the end key to
decline the sharing session and disconnect the
voice call.
When you receive a video clip, to mute the sound of
the clip, select Mute.
To end video sharing, select Stop. Video sharing
also ends if the active voice call ends.
Internet calls
With the internet call service (network service), you
can make and receive calls over the internet.
Internet calls can be established between
computers, between mobile phones, and between
a VoIP device and a traditional telephone. To make
or receive an internet call, your device must be
connected to an internet call service.
To connect to an internet call service, your device
must be in the coverage of a connection network,
such as a WLAN access point.
Your device supports voice calls over the internet
(net calls). Your device attempts emergency calls
primarily over cellular networks. If an emergency
call using cellular networks is not successful, your
device attempts an emergency call through your net
call provider. Due to the established nature of
cellular telephony, you should use cellular networks
for emergency calls, if possible. If you have cellular
network coverage available, make sure that your
cellular phone is switched on and ready to make
calls before you attempt an emergency call. The
capability for an emergency call using internet
telephony depends on the availability of a WLAN
network and your net call provider's
implementation of emergency call capabilities.
Contact your net call provider to check the internet
telephony emergency call capability.
Create an internet call profile
Before you can make internet calls, you must create
an internet call profile.
1. Press
, select Tools > Settings >
Connection > SIP settings > Options > New
SIP profile, and enter the required information.
Ensure that Registration is set to Always on.
Contact your internet call provider for the correct
settings.
2. Select Proxy server > Transport type >
Auto.
3. Select Back until you return to the main view of
connection settings.
4. Select Internet tel. > Options > New
profile. Enter a name for the profile, and select
the SIP profile you just created.
128
Make calls

Table of Contents

Related product manuals