GB 21
FIRST TIME INSTALLATION
When the channel search from ASTRA is finished you can search
for channels from other satellites.
• Press MENU on the remote control and the MAIN MENU will
appear on the screen.
• Select line 6, System Configuration
• On demand, enter the Access Code 1234....
......and the System Configuration Menu will appear.
• Select Channel Search
• Press OK to get the Channel Search menu again.
The most common satellite positions (22 pos.) are prepro-
grammed in the SatScan motor.
As long as you select satellite positions from the line “Automatic
Search” you also have access to preprogrammed TV channels
that makes it easy to check the signal quality.
• From line 1 Automatic Search, select another satellite from
which you want to watch channels.
Then the procedure is the same as for the first satellite installa-
tion.
However, you must give the antenna motor some time to
turn itself to the new position!
To Next Page
Loading...
