• Destinations — Set up new or edit existing access points. Some or all access points
may be preset for your device by your service provider, and you may not be able to
create, edit or remove them.
• VPN — Manage the settings for virtual private networking.
• Packet data — Define when packet data network is attached, and enter the default
packet switched access point name if you use your device as a modem for a computer.
• Wireless LAN — Set the device to display an indicator when a Wi-Fi network is
available, and define how often the device searches for networks.
• Video sharing — Enable video sharing, select the SIP profile for video sharing, and
define the video saving settings.
• SIP settings — View or create session initiation protocol (SIP) profiles.
• XDM profile — Create an XDM profile. The XDM profile is required for many
communications applications, for example, presence.
• Presence — Edit the settings for presence (network service). To register for the
service, contact your service provider.
• Remote drives — Connect the device to a remote drive.
• Configurations — View and delete trusted servers from which your device may
receive configuration settings.
Access points
Create a new access point
Select Menu > Ctrl. panel > Settings and Connection > Destinations.
You may receive access point settings in a message from a service provider. Some or all
access points may be preset for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
When you select one of the access point groups (
, , , , ), you can see the
access point types:
indicates a protected access point
indicates a packet data access point
indicates a Wi-Fi access point
To create a new access point, select
Access point. The device asks you to check for
available connections. After the search, connections that are already available are
displayed and can be shared by a new access point. If you skip this step, you are asked
to select a connection method and to define the settings needed.
To edit the settings of an access point, select one of the access point groups, scroll to
an access point, and select Edit. Use the instructions provided by your service provider
to edit the following:
• Connection name — Enter a name for the connection.
• Data bearer — Select the data connection type.
Settings
© 2010 Nokia. All rights reserved. 51
To Next Page
Loading...
