To define the packet data settings, select Packet data connection and When
available to register the device to the packet data network when you switch the device
on in a supported network, or When needed to register the device to a packet data
network only when an application or action attempts to establish a packet data
connection. This setting affects all access points for packet data connections. To use the
device as a packet data modem for your computer, select Access point, and enter the
access point name provided by your service provider.
WLAN settings
Select Menu > Ctrl. panel > Settings and Connection > Wireless LAN.
To have an indicator displayed when there is a wireless LAN (WLAN) available in your
current location, select Show WLAN availability > Yes.
To select the interval for your device to scan for available WLANs, and to update the
indicator, select Scan for networks. This setting is not available unless you select Show
WLAN availability > Yes.
To set the device to test the internet capability of the selected WLAN automatically, to
ask for permission every time, or to never perform the connectivity test, select Internet
connectivity test > Run automatically, Ask every time, or Never run. If you select
Run automatically or allow the test to be performed when the device asks for it, and
the connectivity test is performed successfully, the access point is saved to internet
destinations.
WLAN security settings
Select Menu > Ctrl. panel > Settings and Connection > Destinations > Access
point, and follow the instructions on the display.
To edit a wireless LAN (WLAN) access point, open one of the access point groups, and
select an access point marked with
.
To enter the settings for the selected security mode, select WLAN security settings.
Session initiation protocol (SIP) settings
Select Menu > Ctrl. panel > Settings and Connection > SIP settings.
The session initiation protocol (SIP) is used for creating, modifying, and terminating
certain types of communication sessions with one or more participants (network
service). SIP profiles include settings for these sessions. The SIP profile used by default
for a communication session is underlined.
To create a SIP profile, select Options > New SIP profile > Use default profile or
Use existing profile.
Settings
© 2010 Nokia. All rights reserved. 53
To Next Page
Loading...
