Copyright
©
2006 Nokia. All rights reserved.
Personalise your device
17
Profiles—set tones
To set and customise the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles. If the
currently selected profile is other than General, the profile
name is shown at the top of the display in the standby
mode.
To change the profile, press in the standby mode.
Scroll to the profile you want to activate, and select OK.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Personalise.
Scroll to the setting you want to change, and press to
open the choices. Tones stored on the memory card are
indicated with . You can scroll through the tone list
and listen to each one before you make your selection.
Press any key to stop the sound.
Tip! In the list of tones, Tone downloads opens a list
of bookmarks. You can select a bookmark and start
connection to a Web page to download tones.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless network
is turned off, as indicated by in the signal strength
indicator area. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Warning: In the offline profile you cannot make
or receive any calls, except make calls to certain
emergency numbers, or use other features that
require network coverage. To make calls, you must
first activate the phone function by changing
profiles. If the device has been locked, enter the
lock code.
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
wireless device use is prohibited or when it may
cause interference or danger.
To leave the Offline profile, press , and select another
profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength). If a
Bluetooth connection is activated before entering the
Offline profile, it will be deactivated. A Bluetooth
connection is automatically reactivated after leaving the
Offline profile. See ’Bluetooth connection settings’, p. 83.
To Next Page
Loading...
