Copyright 
©
 2006 Nokia. All rights reserved.
Contacts (phonebook)
52
Default numbers and addresses
You can assign default numbers or addresses to a contact 
card. In this way if a contact has several numbers or 
addresses, you can easily call or send a message to the 
contact to a certain number or address. The default 
number is also used in voice dialing.
1 In Contacts, select a contact, and press  .
2 Select Options > Defaults.
3 Select a default to which you want to add a number or 
an address, and select Assign.
4 Select a number or an address you want to set as a 
default.
The default number or address is underlined in the 
contact card.
Copy contacts
To copy names and numbers from a SIM card to your 
device, press  , and select Contacts > Options > SIM 
contacts > SIM directory. Select the names you want to 
copy and Options > Copy to Contacts.
To copy contacts to your SIM card, press  , and select 
Contacts. Select the names you want to copy and 
Options > Copy to SIM direct.; or select Options > 
Copy > To SIM directory. Only the contact card fields 
supported by your SIM card are copied.
Tip! You can synchronize your contacts to a 
compatible PC with Nokia PC Suite. 
SIM directory and services
For availability and information on using SIM card services, 
contact your SIM card vendor. This may be the service 
provider, network operator, or other vendor.
Press , and select Contacts > Options > SIM 
contacts > SIM directory to see the names and numbers 
stored on the SIM card. In the SIM directory you can add, 
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options > 
SIM contacts > Fixed dialling contacts. This setting is 
only shown if supported by your SIM card.
To restrict calls from your device to selected phone 
numbers, select Options > Activ. fixed dialling. To add 
new numbers to the fixed dialing list, select Options > 
New SIM contact. You need the PIN2 code for these 
functions.
When you use Fixed dialling, packet data connections are 
not possible, except when sending text messages over a 
packet data connection. In this case, the message center 
number and the recipient’s phone number must be 
included on the fixed dialing list.
9243184_N71-1_en_apac.book  Page 52  Friday, May 26, 2006  2:31 PM