Copyright
©
2006 Nokia. All rights reserved.
Tools
84
Select Options > Advanced settings to change the
following settings:
Network type — Select the Internet protocol type: IPv4
settings or IPv6 settings. The other settings depend on
the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address of
your device.
DNS address — In Primary name serv.:, enter the IP
address of the primary DNS server. In Second. name
server:, enter the IP address of the secondary DNS server.
Contact your Internet service provider to obtain these
addresses.
Proxy serv. address — Define the address for the proxy
server.
Proxy port number — Enter the proxy port number.
Homepage — Define a home page.
Select Options > Advanced settings and from the
following:
IPv4 settings > Phone IP address (the IP address of your
device), Subnet mask (the subnet IP address), Default
gateway (the gateway), and DNS address — Enter the IP
addresses of the primary and secondary DNS server.
Contact your Internet service provider for these addresses.
IPv6 settings > DNS address — Select Automatic, Well-
known, or User defined.
Ad-hoc channel (only for Ad-hoc) — To enter a channel
number (1-11) manually, select User defined.
Proxy serv. address — Enter the address for the proxy
server.
Proxy port number — Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn. — If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select When needed, the device uses a
packet data connection only if you start an application or
action that needs it.
Access point — The access point name is needed to use
your device as a packet data modem to your computer.
9243184_N71-1_en_apac.book Page 84 Friday, May 26, 2006 2:31 PM
To Next Page
Loading...
