Nokia N81 - 3-D Tones

Personalize your device
101
When you choose a tone from a list, the Download sounds
link (network service) opens a list of bookmarks. You can
select a bookmark and start connection to a web page to
download tones.
If you want the caller’s name to be spoken when your
device rings, select Options > Customize, and set Say
caller's name to On. The caller’s name must be saved in
Contacts.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
When the Offline profile is active, you can use your device
without a (U)SIM card.
Important: In the offline profile you cannot make or
receive any calls, or use other features that require cellular
network coverage. Calls may still be possible to the official
emergency number programmed into your device. To make
calls, you must first activate the phone function by
changing profiles. If the device has been locked, enter the
lock code.
When you have activated the Offline profile, you can still
use the wireless LAN, for example, to read your e-mail or
browse on the internet. Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection. See ‘Wireless LAN’, p. 73.
You can also use Bluetooth connectivity while in the
Offline profile. See ‘Bluetooth connectivity’, p. 75.
To leave the Offline profile, press the power key, and
select another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength).
3-D tones
Press , and select Tools > Utilities > 3-D tones. With
3-D tones you can enable three-dimensional sound
effects for ringing tones. Not all ringing tones support 3-
D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On.
Try how the different effects under Sound trajectory,
Trajectory speed, Reverberation, and Doppler effect
change the tone. These settings may not be available for
all ringing tones and sound trajectories.